Відео

HP Officejet 8025e is not listed on fix it page🤔

En español por favor

Please help. Is this download comparable with Mac? Or only windows? I’m kind of new here. Thank you very much. I sure can’t afford the 130.00 for a black cartridge from hp

If you are here taking the test and you get a shorter middle aged white guy wearing shades and a blue cap, DO NOT TAKE THE TEST! He WILL fail you for bs. I did not do a single thing wrong on the 2 times I was forced to endure 10 minutes with him. He alleged I wasn’t looking enough as the sole reason on BOTH times I failed which I absolutely was not. Even if that were true, it would not be enough to fail me alone by the actual standards of the test. The 6 extra hours of behind the wheel this asshat made me do we’re basically spent with the instructor appalled how I did not pass and him agreeing that the tester was out of line. Just take it at an open road location like Anoka, ended up with a super nice lady and passed with not a single point missed.

Thank you for this! I am now able to use my non-hp cartridges because of your help.

I’m having the same issue now. I’m turned off for life. I will not be purchasing anything from HP again. I don’t like being forced to do anything that I don’t want to do especially when it comes to spending my money.

just did my volt for the first time. plug was completely stripped. dealer was the last to service from sticker. got frustrated and just unscrewed the oil filter (which was also on there extremely tight), and turned the engine on for 5 seconds. pretty quickly drained 3.7 liters. I almost wonder if they stripped the drain plug a long time ago and never told the last owner and never changed the oil, just kept resetting the counter. filter date was 5 years older than the last sticker date.

I'll NEVER buy another one! This problem should be illegal!

When the new driver gets to the "Welcome to the HP Printer Update" screen, I am unable to check the box. This is after restoring defaults and removing the smart ink cartridge. Nothing seems to the help, the status of the driver says unavailable. There seems to be no way to roll this firmware back.

This upload of yours is so HELPFUL! Thank you for giving me a fix that allows me to use my printer. HP should be ashamed of themselves.

Thanks for this video! Just finished replacing the fan motor at 1:30am to find out it still has the ch67 code. This gives me hope! Will continue to work on it tomorrow and will check the board praying I do t have to buy a new one. Thank you!

Thank you for the video. Much appreciated. Your suggestion about rolling the tpo onto the osb from the middle to the side in two stages is much easier and better than what your brother-in-law decided. How you guys ended up doing it worked but was clumsy and nerve wrecking for you, I am sure.

Here's how to disable automatic firmware updates for an HP 6970 printer using the HP Smart app: Click the printer image on the home screen Click Advanced Settings Click Tools Click Printer Updates and then Firmware Updates Select Do not check for updates and click Apply

Pronounced grow-ee

Nice video. I’m most impressed that you didn’t drop half your tools or parts in the water. I would not have been that skilled. 😂

That tin foil trick just saved my day

I could kiss you!

the Savior's solution to our problem starts at 1:32

I don't see the 6958 listed as a downgrade option. Is there a downgrade for that or do any of the other ones work?

Myabe you should have left the nail in the tire and then used it, might have worked then; but then again it is expired.

Many people had their printers destroyed by generic printer ink. Thus is one reason why HP does this. It is also why if you purchased a new HP printer and install cheap generics and there were problems as you demand HP give you a new printer after you destroyed the one you purchased. Using ineligible ink automatically voids your warranty. Good luck with that.

I pay NOTHING for my HP printer ink cartridges. It's called HP Instant Ink. 😎

4 years later, man this video really helped me out got my kill switch installed just as you showed In this video thank you very much if you ever see this comment ty.😊

I HATE HP printers...

Thank you kindly Sir. I'm in exactly the same situation with my bike stone dead. The confusing thing is it all started with the solenoid not clicking. Purchased a new magnet relay and then electricity died altogether - must be two different issues, however illogical it may seem.

thanks I did it the way you showed and it works great

Thanks for the updated links to the firmware downgrade for an HP 6968...worked like a charm! I too, will never buy another HP printer.....

just bought a 1972 Whaler 13ft. I have no clue about working on boats/motors but the guy said the motor ran two years ago. Wish me luck🤞🏼

We should all send HP an invoice for lost time fixing these piles of shit and for lost productivity.

Nice work! It’s interesting that Toro uses the blade bracket with the pulley on it even on mowers that aren’t self propelled. Part of the reason the new motor rips through grass is likely because it’s governed at the full 3600 rpm the engine is rated for. Federal regulations limit mower blade tip speed to a maximum of 19,000 feet per minute to minimize hazards from thrown rocks and other debris, which works out to about 3300 rpm for a 22 inch mower (though I’ve found most mowers are set even slower from the factory). So with that pressure washer engine you’re getting not only the full horsepower output of the engine but also at least 9% more blade speed.

How many mph should you go??

7 yrs ago today

Is it possible one has memory seats and another does not?

Is this an upgrade from the battery dell sells it with?

Great video thanks a lot sir

Thank you so very much was very successful for me dirty bastards😅

Oh, and I'll add, I had to go back in to the Update item in settings and change back to DO NOT CHECK... Just happened to walk by the printer several minutes after completing this solution and saw "Downloading Updates..." I was able to cancel it. I've instructed everyone to *never* choose to update these HP printers and no one here would poke around and do so, so I'm still unsure how an update was triggered that caused the Non HP chip error in the first place.

Thank you, saved me a big headache!

What an awesome video. Got me so excited to finally have parking wipers again. But ohhhh no, Saab has a trick up his sleeve…..SOMEBODY TOOK MY MICROSWITCH OFF😭😭😭 . Yes, no switch at all, I was like this does not look the same…. I see why…. Does anyone know if they sell them? It seems to be almost a “serviceable” part

90F outside and I come home and one unit has CH-05, one has CH-67, and the other has a bad power supply (maybe the plug fuse; has been out of service for 2y+). Ugh. This is the first video in English I've found on youtube for these models/error.

downgrade worked for me! Thanks for posting. @markd.7887 if you do find class action lawsuit info on this please let us know. Thanks in advance

I have a fly wheel thats hard to turn note i did have a dead battery its on charger now, starter engages and all fly wheel is spinning slow

Thank you, you saved my life! ... or at least for the moment: I downgraded the firmware, and it works.

The climate and Radio were fixed in the 2013 model. I own and drive a 2013 Chevrolet Volt and I can turn off the radio and go into climate with having to turn the radio back on. I also believe you could down an update for the 2012 model to fix that. I’m assuming you don’t have the car anymore but there you go.

4 more days until i take my test here

Beautiful

I am so glad that I came across your video. It worked and saved me a headache of having to do so much research on my own. Thank you 😊

This one is from GREECE, thank you you're a lifesaver as well as a money saver!!!

Thanks for very useful video and DIY

Matthew, You are indeed a lucky man to have a bride who can diagnose/trouble shoot a refrigerator. Shop class at her high school must have been fantastic.